Rockwell Automation 1757-SWKIT5000 ProcessLogix R500.1 Installation and Upgrade Guide - Manual (Page 67)

1 Publication 1757-IN500A-EN-P - September 2002
Chapter
3
ProcessLogix Server Installation Procedures
Installing ProcessLogix
Software on a Clean PC Rockwell Automation delivers ProcessLogix Server with all the required
software pre-installed. The following instructions can be used if the system has
to be reinstalled or for new installations on a PC that was not purchased from
Rockwell Automation.
The following table lists the items that you MUST complete before attempting
to install the ProcessLogix software. If you are installing ProcessLogix
software on a redundant Server pair you must complete the items on
SERVERA then repeat the same items for SERVERB.
✔
Step Item Page
1. Clean System Windows 2000 Server Installation 2-1
2. Windows 2000 Service Pack 2 Installation 2-28
3. Windows 2000 Security Rollup Installation 2-30
4. Internet Explorer 6.0 Installation 2-32
5. Internet Explorer 6.0 Security Update Installation 2-34
6. Updating Windows Installer 2-36
7. Additional Operating System Customization Procedures 2-37
8. Creating an Emergency Repair Disk 2-39
9. Creating the ProcessLogix User Accounts 2-41
10. 1784-PCIC Driver Installation 7-1
IMPORTANT
If you purchased a new ProcessLogix R500.1 Server from
Rockwell Automation, the operating system and
ProcessLogix software have already been installed. Do not
reinstall the software. Refer to the ProcessLogix R500.1
Server Installation Instructions, publication 1757-IN950
shipped with your hardware.