Rockwell Automation 1757-SWKIT5000 ProcessLogix R500.1 Installation and Upgrade Guide - Manual (Page 212)

Publication 1757-IN500A-EN-P - September 2002
8-14 Supplementary Procedures
Installing NetShield and Configuring Directories for Scan
Exclusion
Use the following procedure to install the NetShield program and configure
directories to be excluded from the virus scan.
1. Follow the manufacturer’s instructions and on-screen prompts to install
the Network Associates software on your PC.
2. When the option to use System or Custom Account appears, select
System Account.
3. After NetShield is installed, click Start
⇒
Programs
⇒
Network
Associates
⇒
NetShield Console.
4. In the Console, click Scan
⇒
Properties to call up the Properties
dialog box.
5. Click the Detection tab.
6. Uncheck the outbound files checkbox.
7. Click the Exclusions tab.
8. Click Add to open the Add Exclusion Item dialog box.
9. Enter this path or Browse to:
>C:\Honeywell\server\data<
and click OK.
10. Click Add to open the Add Exclusion Item dialog box.
11. Enter this path or Browse to:
>C:\Honeywell\TPS50\SYSTEM\ER <
and click OK.
12. Click OK to close the Properties dialog box.
13. Click Scan
⇒
Exit to close the Console.