Installing processlogix r500.1 software, Finalizing r400.0 to r500.1 upgrade, Reconnect redundant servers – Rockwell Automation 1757-SWKIT5000 ProcessLogix R500.1 Installation and Upgrade Guide User Manual
Page 115: Transferring r400.0 data to the r500.1 server

Publication 1757-IN500A-EN-P - September 2002
ProcessLogix Server Upgrade Procedures 4-27
11. Empty the Recycle Bin.
12. Restart the PC.
Installing ProcessLogix
R500.1 Software
The following table lists the items you MUST complete to install the
ProcessLogix software.
Finalizing R400.0 to R500.1
Upgrade
Reconnect Redundant Servers
If you have a redundant Server pair, both the SERVERA and SERVERB
nodes should have been upgraded to ProcessLogix R500.1.
1. Shutdown both servers.
2. Reconnect the Ethernet network cable(s).
3. Restart both nodes (SERVERA and SERVERB) before proceeding to
the next step.
Transferring R400.0 Data to the R500.1 Server
1. If you have a non-redundant server:
a. Enter this command:
xcopy T:\R400Data\*.* C:\R400Data /E
and press
b. If necessary, enter >D< to specify that R400Data is a directory.
2. If you have a redundant Server pair,
✔
Step
Item
Page
1.
Windows 2000 Service Pack 2 Installation
2.
Windows 2000 Security Rollup Installation
3.
Internet Explorer 6.0 Installation
4.
Internet Explorer 6.0 Security Update Installation
5.
6.