Rockwell Automation 1757-SWKIT5000 ProcessLogix R500.1 Installation and Upgrade Guide - Manual (Page 63)

Publication 1757-IN500A-EN-P - September 2002
Operating System Installation Procedures 2-39
Creating an Emergency
Repair Disk After all installations and drivers are installed, you should now create your
Emergency Repair Disk.
Windows 2000
Use the following procedure to create an emergency repair disk for your
Windows 2000 installation.
1. Insert a blank diskette into the PC's floppy drive.
2. Click Start
⇒
Programs
⇒
Accessories
⇒
System Tools
⇒
Backup.
3. Click Emergency Repair Disk.
An Emergency Repair Diskette window will appear.
4. Check the Also back up the registry to the repair directory checkbox and
click OK.
5. When finished, click OK.
Table 2.D Required System Settings for ProcessLogix R500.1 software
Function Required Setting Value
Dynamic Host Configuration
Protocol (DHCP) IP Addressing ProcessLogix System requires that all specified IP
address are fixed and known. We recommend that you
do not use DHCP, but if your organization requires it,
use only reserved addressing.
View Options
Windows 2000 Server Explorer
Show all Files
Be sure the Hide file extensions for known file types
selection is not checked. This should be set for each
user the first time you logon.
Virtual Memory Navigate in Knowledge Builder to Server and Client
Installation Guide
⇒
Preparing the
Server
⇒
Configuring Virtual Memory for more
information.