Rockwell Automation 1757-SWKIT5000 ProcessLogix R500.1 Installation and Upgrade Guide - Manual (Page 130)

Publication 1757-IN500A-EN-P - September 2002
5-6 ProcessLogix Client Installation and Upgrade Procedures
Upgrade R320.0 Windows NT 4.0 Client to R500.1 Windows 2000
Professional Client (Clean Install)
The following table lists the items that you must complete to upgrade an
R320.0 Windows NT 4.0 Client to an R500.1 Windows 2000 Professional
Client.
IMPORTANT
Due to significant changes in the ProcessLogix software,
operating system, and performance requirements,
migration from a ProcessLogix R320.0 Client to a
ProcessLogix R500.1 Client requires that you backup your
R320.0 data and then perform a clean ProcessLogix R500.1
Client installation. Refer to Table 11.B to confirm that your
PC meets the platform requirements for a ProcessLogix
R500.1 Client.
Table 5.D
✔
Step Task to Complete: Refer to:
1 Saving Important Data 5-10
2 Networking an R320.0 Client to a Remote PC 5-11
3 Clean System Windows 2000 Professional Installation 2-11
4 Windows 2000 Service Pack 2 Installation 2-28
5 Windows 2000 Security Rollup Installation 2-30
6 Internet Explorer 6.0 Installation 2-32
7 Internet Explorer 6.0 Security Update Installation 2-34
8 Updating Windows Installer 2-36
9 Additional Operating System Customization Procedures 2-37
10 Creating an Emergency Repair Disk 2-39
11 Creating the ProcessLogix User Accounts 2-41
12 Installing ProcessLogix R500.1 Client Software 5-14
13 Restoring ProcessLogix Data 5-23