Rockwell Automation 1408-EMxx PowerMonitor 1000 Unit - Manual (Page 60)

60 Rockwell Automation Publication 1408-UM001D-EN-P - September 2013
Chapter 5 Explicit Messaging
3. Choose the appropriate parameters in the Message Configuration window.
Communication
Type
Parameter Choice
Ethernet Data Table Address (This
Controller)
Read: This is the controller tag in which to
store the data being read
Write: This is the controller tag that stores
the value to be written to the power
monitor.
Size in Elements This is the number of elements being read
or written to. If you are performing a
single element read or write, then this
value should be 1. If you are performing a
multiple element read or write, then this
should be the number of elements after
the source element that you wish to read
or write.
Channel 1
Data Table Address
(Target Device)
Refer to Appendix A for the address of the
specific data value you’re reading or
writing to.
MultiHop Yes
Ethernet Network Communication
Serial Communication