Rockwell Automation 1408-EMxx PowerMonitor 1000 Unit - Manual (Page 127)

Rockwell Automation Publication 1408-UM001D-EN-P - September 2013 127
Appendix
D
Certifications
The power monitor adheres to these certifications.
EtherNet/IP Network
Conformance Testing All power monitor products equipped with an EtherNet/IP network
communication port bear the mark shown. This mark indicates the power
monitor has been tested at an Open Device Vendor Association (ODVA)
independent test lab and has passed the EtherNet/IP network conformance test.
This test provides a level of assurance that the power monitor will interoperate
with other conformance tested EtherNet/IP network devices (including devices
from other vendors). One representative device from the power monitor
EtherNet/IP network family of devices; the 1408-EM3-ENT has been tested by
ODVA using EtherNet/IP Conformance Test, version A2.8. The ODVA website
http://www.odva.org maintains a list of products that have passed the
conformance test at one of their test labs.
UL/CU-L UL 508 listed, File E56639, for Industrial Control Equipment and C-UL
Certified.
CE Certification If this product bears the CE marking, it is approved for installation within the
European Union and EEA regions. It has been designed to meet the following
directives.
EMC Directive
This product is tested to meet Council Directive 89/336/EEC Electromagnetic
Compatibility (EMC) and the following standards, in whole, documented in a
technical construction file.
EN55011 – Radiated Electromagnetic Emissions
EN55011 – Conducted Emissions
ENV50204 – RF 900MHz Keyed Carrier