Use the web interface – Rockwell Automation 1408-EMxx PowerMonitor 1000 Unit User Manual
Page 22

22
Rockwell Automation Publication 1408-UM001D-EN-P - September 2013
Chapter 1 PowerMonitor 1000 Overview
View Data with the Display
You may also view power monitor wiring diagnostics, metering, status and setup
data using the display. To view data, select Display (instead of Setup) from the top
menu and navigate through the menus as in the setup example. Press
items within a submenu. Display mode does not permit you to change any
parameter. Metering data available depends on the model of your power monitor.
Use the Web Interface
You can use an Internet browser to view data and change configuration settings
on your meter.
Follow these steps to use the Web interface.
1. Use a computer that has network access to the power monitor, open your
Internet browser, type the unit IP address in the address field, and press
Enter.
The power monitor’s home page displays in your browser.
The home page displays general information about the power monitor. The
navigation menu is on the left.