Low voltage directive, Ansi/ieee tested – Rockwell Automation 1408-EMxx PowerMonitor 1000 Unit User Manual
Page 128
128
Rockwell Automation Publication 1408-UM001D-EN-P - September 2013
Appendix A Certifications
EN61000 – Immunity
This product is intended for use in an industrial environment.
Low Voltage Directive
This product is tested to meet Council Directive 73/23/EEC Low Voltage, by
applying the safety requirements of EN61010-1.
This equipment is classified as open equipment and must be installed (mounted)
in an enclosure during operation as a means of providing safety protection.
International Standard IEC 529 / NEMA / UL 508 Degree of
Protection
The Bulletin 1408 PowerMonitor 1000 unit is rated as IP10 degree of protection
per International Standard IEC 529. It is considered an open device per NEMA
and UL 508.
Follow the recommended installation guidelines to maintain these ratings.
ANSI/IEEE Tested
Meets or exceeds the Surge Withstand Capability (SWC) C37.90.1 - 2002 for
protective relays and relay systems on all power-connection circuit terminations.