Lenze c300 - Manual (Page 78)

Lenze · Controller | Parameter setting & programming · Reference Manual · DMS 1.5 EN · 04/2014 · TD17
78
10 Device replacement - replacing the controller (in the event of
service)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
10.5 Error messages after a device replacement
Message Information / remedy
Backup/restore cannot be copied. Not
enough free memory on the data medium. The SD card used has not enough free memory space to
execute a safety backup. Delete non-required data from
the SD card and try it again.
The replacement device is not compatible
with the original device. Device
migration was not successful. In order to replace a device, the devices have to be
compatible.
 Which replacement device is suitable for the
Controller? ( 73)
Inserted SD card has higher version than
the system. Please update the controller
first. Update the Controller firmware. Afterwards, you can
replace the device.
 After the device replacement: Automatic data update
( 75)
Error while creating the backup for device
replacement. Please try again. An error has occurred while creating a backup. Please try
again.
Migration failed. Please check your
configuration. The migration of the databases failed. Please contact
your manufacturer.