Lenze c300 - Manual (Page 178)

Lenze · Controller | Parameter setting & programming · Reference Manual · DMS 1.5 EN · 04/2014 · TD17
178
13 Parameter reference
13.9 Communication cards: optional interface
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
13.9 Communication cards: optional interface
This chapter provides you with some information about the parameters of the optional controller
communication cards. The communication cards allow for a use of the controller with further bus
systems.
EtherCAT is the "on board" standard bus system of the Controllers.
The following communication cards can be used with the controllers:
 CAN (MC-CAN2) communication card / CAN interface for Controller c300/p300 ( 179)
 PROFIBUS and PROFINET communication cards ( 185)

Note!
Controllers c300/p300 ...
• are equipped with an integrated CAN communication interface (on board);
• only support the CAN master functionality.
The optional MC-CAN2 communication card is not supported by the Controllers c300/
p300.