12 visualisation with »visiwinnet – Lenze c300 User Manual

Page 100

Lenze · Controller | Parameter setting & programming · Reference Manual · DMS 1.5 EN · 04/2014 · TD17

100

Visualisation with »VisiWinNET®«

12.3

Using the visualisation to access data of the control/parameters

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

• CAN OPC tunnel

• CAN Remote OPC tunnel (remote access)

• EtherCAT OPC tunnel

• EtherCAT Remote OPC tunnel (remote access)

Field device parameters at the CAN bus

Field device parameters at the EtherCAT bus

Note: The (Remote) SoftPLC OPC Tunnel communication

type requires a separate configuration of the controller

(experts only - please contact Lenze if required!).

• SoftPLC OPC tunnel

• SoftPLC Remote OPC tunnel (remote access)

PLC (Logic/Motion) data

Communication type / description

Access to ...

This manual is related to the following products: