4 establishing windows® ce access rights, 1 setting up windows® ce users in »webconfig, Establishing windows® ce access rights – Lenze c300 User Manual
Page 37: Setting up windows® ce users in »webconfig, 5commissioning the controller
5
Commissioning the controller
5.4
Configuring the controller
37
Lenze · Controller | Parameter setting & programming · Reference Manual · DMS 1.5 EN · 04/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
5.4.4
Establishing Windows® CE access rights
In order to be able to establish a connection to the controller, each user has to be assigned access
rights. For this the respective user has to be set up as a Windows® CE user with a user name and a
password. Windows® CE users can be set up via »WebConfig« and the »EASY Starter«:
Setting up Windows® CE users in »WebConfig«
The representation for user 1 is displayed. The users 2 to 10 are displayed analogously.
5.4.4.1
Setting up Windows® CE users in »WebConfig«
• Up to ten Windows® CE users can be set up in »WebConfig« the User management 10 area.
• Use parameters 101 to 169 to set up the user name, password, and various authorisations for a
maximum of ten users.
The representation for user 1 is displayed. The users 2 to 10 are displayed analogously.
Detailed information on the parameters can be found here:
Basic parameters of the Controllers 3200 C/c300 and p300/p500
Note!
You have to be set up as Windows® CE user to have authorisations for further services
like FTP, telnet, or web server access.