Lenze c300 - Manual (Page 174)

Lenze · Controller | Parameter setting & programming · Reference Manual · DMS 1.5 EN · 04/2014 · TD17
174
13 Parameter reference
13.8 Backup&Restore
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
13.8 Backup&Restore
In this chapter, all parameters for carrying out a »Backup & Restore« (using »WebConfig«) are listed
in numerically ascending order.
C0809
C0810
C0811
C0813
Parameter | Name:
C0809 | Select a main action for the Lenze software
Data type: UNSIGNED_16
Index: 23766
d
= 5CD6
h
Selection list (Lenze setting printed in bold) Info
0 Backup
 Read access  Write access  CINH  PLC-STOP  No transfer
Parameter | Name:
C0810 | Select a main action for the Lenze software
Data type: UNSIGNED_16
Index: 23765
d
= 5CD5
h
Carry out a backup or restore by means of the WebConfig.
Selection list
(Lenze setting printed in bold) Info
2 Restore Carry out restore:
• Select the process to restore the data base of a backup
at an individual L-force Controller.
3 Auto restore Carry out auto restore:
• Restore (restore of a backup) at any number of L-force
Controllers.
• If you connect the USB stick to another L-force
Controller, the same process is carried out
automatically (standard set-up).
4 Update Carry out update:
• The software of the L-force Controller is updated (the
data is transferred from the USB stick to the internal
flash memory of the L-force Controller).
5 Auto update Carry out auto update:
• Multiple restore of an update at any number of L-
force Controllers.
• If you connect the USB stick to another L-force
Controller, the same process is carried out
automatically (standard set-up).
 Read access  Write access  CINH  PLC-STOP  No transfer
Parameter | Name:
C0811 | Assign a name for the backup
Data type: VISIBLE_STRING
Index: 23764
d
= 5CD4
h
 Read access  Write access  CINH  PLC-STOP  No transfer
Parameter | Name:
C0813 | Display of the backup or update files
Data type: UNSIGNED_16
Index: 23762
d
= 5CD2
h
Selection list (Lenze setting printed in bold) Info
1 Display 1 to 10
2 Display 11 to 20
3 Display 21 to 30
 Read access  Write access  CINH  PLC-STOP  No transfer