Lenze c300 - Manual (Page 120)

Lenze · Controller | Parameter setting & programming · Reference Manual · DMS 1.5 EN · 04/2014 · TD17
120
12 Visualisation with »VisiWinNET®«
12.7 OPC tunnel for external visualisation (remote access)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
12.7 OPC tunnel for external visualisation (remote access)
12.7.1 Windows® CE operating system
[12-3] Remote access with one visualisation controller ("Visu") and one controller
The »VisiWinNET®« Runtime of the external
controller, Controller(Visu), accesses the OPC
servers of the control system Controller via the
OPC tunnels (1, 2).

Note!
There is no OPC server available for PROFIBUS and PROFINET.
Controller c300/p300:
• The OPC communication for »VisiWinNET« is exclusively available for Controller p300
without PLC.
• Otherwise, only the Lenze "Logic&Motion" direct driver can be used for the data
exchange between »VisiWinNET« and PLC.