Lenze c300 - Manual (Page 51)

6 Parameter setting using »WebConfig«
6.5 User interface of »WebConfig«
51
Lenze · Controller | Parameter setting & programming · Reference Manual · DMS 1.5 EN · 04/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
6.5.2 Diagnostic/device commands
Button Function
Diagnostics
Displays parameters of the following areas:
• Diagnostics
• Logbook
In the Logbook area you can configure settings regarding the Logbook.
Further information on remote maintenance options of the Controller can
be found here:
 Remote maintenance and diagnostics ( 79)
Logbook
Displays logbook contents.
• Different filter settings display, for instance, only the oldest or only the
most recent logbook entries.
 Logbook ( 52)
Device commands
Displays the commands of the Controller to be executed.
The available commands can be found in the following section under
18 ( C0018 )
 Basic parameters of the Controllers 3200 C/c300 and p300/p500 ( 131)