Lenze c300 - Manual (Page 125)

12 Visualisation with »VisiWinNET®«
12.7 OPC tunnel for external visualisation (remote access)
125
Lenze · Controller | Parameter setting & programming · Reference Manual · DMS 1.5 EN · 04/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
EtherCAT Remote OPC tunnel Required information:
• Remote name of the target device (example: "RemoteIPC")
• EtherCAT interface (EtherCAT Interface)
• EtherCAT address (EtherCAT Node Address)
• Devicealias
• Parameterfile
Supported file format:
• Device description files (*.dcf, *.eds)
• »Global Drive Control« file(*.gdc)
• Parameter file (*.pdb)
Note: EtherCAT device description files (*.xml) are not supported!
SoftPLC Remote OPC tunnel Required information:
• Remote name of the target device (example: "RemoteIPC")
• The configuration name (Configuration Name) must be entered
manually. Default value of the Controller: PLC1.
Note: The configuration name must be identical to the specification in
the OPCServer.ini file!
• The OPCServer.ini file is on the memory card of the Controller (directory:
\USBStorage ).
Supported file format:
• Symbol file (*.sym)
Note: XML symbol configuration files exported from the »PLC Designer«
V3.x are not supported!
 Manual integration of variables (experts only - background knowledge
required!) ( 116)
Communication type Description