Lenze c300 - Manual (Page 129)

13 Parameter reference
13.1 Structure of the parameter description
129
Lenze · Controller | Parameter setting & programming · Reference Manual · DMS 1.5 EN · 04/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
13.1.2 Parameters with read access
Parameters without the "Write access" attribute are read only/not editable.
Description structure
13.1.3 Parameters with write access
Parameters with a checkmark () in front of the "Write access" attribute are editable. The preset
Lenze setting for these parameters is printed in bold.
• The settings can either be changed ...
• ... via a selection list or
• ... by entering a value directly.
13.1.3.1 Parameters with a setting range
Description structure
13.1.3.2 Parameters with a selection list
Description structure
Parameter | Name:
Cxxxxx | _____________
Data type: _______
Index: _______
Descriptive text
Display range
(min. value | unit | max. value)
 Read access  Write access  CINH  PLC-STOP  No transfer
Parameter | Name:
Cxxxxx | _____________
Data type: _______
Index: _______
Descriptive text
Setting range
(min. value | unit | max. value) Lenze setting
 Read access  Write access  CINH  PLC-STOP  No transfer
Parameter | Name:
Cxxxxx | _____________
Data type: _______
Index: _______
Descriptive text
Selection list
(Lenze setting printed in bold)
1
2
3
 Read access  Write access  CINH  PLC-STOP  No transfer