Lenze c300 - Manual (Page 172)

Lenze · Controller | Parameter setting & programming · Reference Manual · DMS 1.5 EN · 04/2014 · TD17
172
13 Parameter reference
13.7 PLC (Logic/Motion)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
13.7 PLC (Logic/Motion)
In this chapter the parameters of the PLC (Logic/Motion) are listed in numerically ascending order.
C0620
C0630
C0640
C0650
C0651
Parameter | Name:
C0620 | PLC: Status
Data type: VISIBLE_STRING
Index: 23955
d
= 5D93
h
Status of the PLC application
 Read access  Write access  CINH  PLC-STOP  No transfer
Parameter | Name:
C0630 | Display Soft PLC window
Data type: UNSIGNED_8
Index: 23945
d
= 5D89
h
Display/hide Soft PLC window on the controller
Display range
(min. value | unit | max. value)
0 1
 Read access  Write access  CINH  PLC-STOP  No transfer
Parameter | Name:
C0640 | Activate field device firmware update
Data type: UNSIGNED_8
Index: 23935
d
= 5D7F
h
Activate firmware update of the field devices: The controller writes the parameters to the connected field devices.
• This function is available depending on the device!
Setting range (min. value | unit | max. value) Lenze setting
0 1 1
 Read access  Write access  CINH  PLC-STOP  No transfer
Parameter | Name:
C0650 | Start Field Device parameter storage
Data type: UNSIGNED_16
Index: 23925
d
= 5D75
h
Save the parameters of the connected field devices to the controller.
• This function is available depending on the device!
Selection list (Lenze setting printed in bold) Info
0 No Operation
1 Start parameter storage
 Read access  Write access  CINH  PLC-STOP  No transfer
Parameter | Name:
C0651 | Status Field Device parameter storage
Data type: VISIBLE_STRING
Index: 23924
d
= 5D74
h
Actual status of the storage of the field device parameters on the controller.
• This function is available depending on the device!
 Read access  Write access  CINH  PLC-STOP  No transfer