Lenze c300 - Manual (Page 122)

Lenze · Controller | Parameter setting & programming · Reference Manual · DMS 1.5 EN · 04/2014 · TD17
122
12 Visualisation with »VisiWinNET®«
12.7 OPC tunnel for external visualisation (remote access)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
12.7.2 Windows® XP/XP Embedded operating system
The »VisiWinNET®« runtime of the external
Windows® XP/XP Embedded controller
accesses (via OPC tunnel 1) the OPC servers of
the Controller.

Note!
There is no OPC server available for PROFIBUS and PROFINET.
Controller c300/p300:
• The OPC communication for »VisiWinNET« is exclusively available for Controller p300
without PLC.
• Otherwise, only the Lenze "Logic&Motion" direct driver can be used for the data
exchange between »VisiWinNET« and PLC.