Lenze c300 - Manual (Page 31)

5 Commissioning the controller
5.1 Identification
31
Lenze · Controller | Parameter setting & programming · Reference Manual · DMS 1.5 EN · 04/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
5.1 Identification
Every controller is provided with a nameplate containing the device data. The device data are
helpful for identifying the technical equipment of the controller. Detailed information relating to
the nameplate data can be found in the operating instructions for the Controller.
Web-based diagnostics/parameter setting
Via »WebConfig« the configuration of the controller can be identified. The parameter values of the
controller can be represented using the web browser.
 Online connection from the Engineering PC to the controller ( 46)
Assigning a unique name to the controller
In order to be able to clearly identify a Controller, the desired name has to be assigned for parameter
13 System identification: Name C0013 . The name assigned can then be used in the corresponding
Engineering tool (e.g. »PLC Designer«), in order to be able to identify the controller.
5.2 Control elements of the controllers
Depending on the equipment and type, the different device series are provided with various control
elements (e.g. function keys for external monitor panels) and status LEDs for diagnostic purposes.
 Status LEDs of the Controllers ( 80)
The controllers can be operated via external input devices (keyboard/mouse). This makes it possible
to carry out comprehensive diagnostics and configuration tasks directly on the controller.

Note!
Here the documentation provides some general information about the commissioning
of a controller. Depending on the design and version of the controller, the
commissioning process can be different.

Operating instructions for the Controller
Here, further information on the device-specific properties of the Controller can be
found.