Lenze c300 - Manual (Page 61)

7 Programming with the »PLC Designer«
7.3 Configuring and parameterising the controller using the control application
61
Lenze · Controller | Parameter setting & programming · Reference Manual · DMS 1.5 EN · 04/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
7.3 Configuring and parameterising the controller using the control application
For the creation of a control application, Lenze provides function blocks in standardised libraries
(e.g.: motion functions according to PLCopen). Further function blocks can for instance be used to
access controller parameters.
By means of the »PLC Designer«, the compiled PLC program has to be loaded to the controller via
Ethernet, where it processes the operating system.