Lenze c300 - Manual (Page 130)

Lenze · Controller | Parameter setting & programming · Reference Manual · DMS 1.5 EN · 04/2014 · TD17
130
13 Parameter reference
13.1 Structure of the parameter description
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
13.1.3.3 Parameters with a bit-coded setting
Description structure
13.1.4 Parameter attributes
Parameter | Name:
Cxxxxx | _____________
Data type: _______
Index: _______
Descriptive text
Value is bit-coded:
Bit 0
...
Bit 31
 Read access  Write access  CINH  PLC-STOP  No transfer
Attribute Meaning
 Read access Read access to parameter possible.
 Write access Write access to parameter possible.

CINH This attribute is not required for the parameter setting of the controllers!
 PLC STOP This attribute is not required for the parameter setting of the controllers!
 No transfer This attribute is not required for the parameter setting of the controllers!