4 acknowledgement, Acknowledgement, 9 alarm and event lists – JUMO 705060 mTRON T - Multifunction Panel 840 Operating Manual User Manual

Page 92

Text mode
Original mode

9 Alarm and event lists

9.4

Acknowledgement

Alarms that are sent from the base unit to a multifunction panel must be acknowledged by the
user.

Acknowledgement

With this function, the user must acknowledge an alarm within the alarm list. Until the alarm has
been acknowledged, it will remain in various locations on the multifunction panel.

(1)

(1) Acknowledgement

NOTE!
The "Acknowledgement" function is only available if a user is logged on and acknowledge-
ment rights have been allocated to him/her.

NOTE!
The user can configure additional acknowledgements in terms of functions that trigger an
alarm. If this is the case, both acknowledgements must be carried out.