JUMO 705060 mTRON T - Multifunction Panel 840 Operating Manual - Manual (Page 121)

121
13 Configuration
13.3 Device data
13.3.1 Device data
Setup dialog
Parameter
Parameter Selection/settings Description
Device name HMI (example)
(max. 20 characters)
The device name is used in the setup
program, Web server, and the PCC and
PCA3000 PC programs.
Memory alarm 0 to 20 to 100 % If the value of the free measured data
memory (internal memory) falls below
the configured size, a memory alarm is
triggered.
Integrator
O-o-R The performance of the integrator channels is configured here if the input signal of
an integrator has an invalid value.
Stop The integration is stopped.
Invalid The integration is set to invalid ("---------
").
History memory 2 MB, 4 MB, 8 MB Size of the history memory (memory
value in MB)
Data download... The preferred memory read-out type is configured here. The parameter only influ-
ences the area of the screen with the function selection and if a USB memory stick
is not inserted.
External memory
Interface
?
?
?