JUMO 705060 mTRON T - Multifunction Panel 840 Operating Manual - Manual (Page 248)

15 Online parameters
248
15.2 Ethernet
These settings are required for the communication with the multifunction panel via LAN (e.g.
setup program, PCA communication software PCC) and for the Web server function of the mul-
tifunction panel.
The multifunction panel supports up to five simultaneous connections.
Setup dialog
Parameter
Parameter Selection/settings Description
DHCP On The multifunction panel takes its IP
address from the DHCP server.
Off The IP address of the multifunction
panel must be assigned manually.
IP address 0.0.0.0 to
223.223.223.2 to
255255255255 Manual allocation of the IP address for
the multifunction panel (active if
DHCP = Off)
The IP address may need to be
requested by the responsible adminis-
trator.
Subnet mask 0.0.0.0 to
255.255.255.0 to
255255255255 Manual setting of the subnet mask
(active if DHCP = Off)
The structure of the subnet mask may
need to be requested by the responsible
administrator.
Standard
gateway 0.0.0.0 to 255255255255 Manual setting of the IP address of the
standard gateway (router) (active if
DHCP = Off)
The IP address may need to be
requested by the responsible adminis-
trator.
?
?
?
?