JUMO 705060 mTRON T - Multifunction Panel 840 Operating Manual - Manual (Page 114)

12 Parameterization
114
12.3.4 Device settings (version 02)
The parameter "User list only at device" decides whether settings for user administration are
performed in the setup program or on the multifunction panel. To change this parameter, the
logged on user must have the "Configure" right.
1( 1(
(1) Shows the current setting and works as
button for the selection menu.
(2) Selection menu:
No: User administration is possible in the
setup program or on the multifunction panel
(settings will be transferred from the setup
program to the multifunction panel or vice
versa).
Yes: User administration is only possible on
the multifunction panel (settings will be
transferred to the setup program)