JUMO 705060 mTRON T - Multifunction Panel 840 Operating Manual - Manual (Page 117)

117
13 Configuration
13.1.2 Language
Many texts that the user can enter can be entered in two languages.
The user can enter the text in the second language by touching the "Language" button (1). The
user can activate "Language 1" or "Language 2" using the setup program. The active language
is used on the multifunction panel.
 Setup program:
P ROJECT > P ROJECT SETTINGS > G ENERAL > L ANGUAGE
NOTE!
The description of the multifunction panel configuration is derived from the setup program,
but it also applies for configuration on the panel itself.
(1)
(1) Language