beautypg.com

3 strain relief for interface cable, Strain relief for interface cable, 3 installation – JUMO 705060 mTRON T - Multifunction Panel 840 Operating Manual User Manual

Page 33

background image

33

3 Installation

3.3

Strain relief for interface cable

Procedure:

(A)

(B)

(B)

(A) Panel for strain relief

(B) Fastening screws

Step

Activity

1

Loosen the fastening screws (B) (do not remove).

2

Place the panel for strain relief (A) on the case and retighten the fastening screws (B).

NOTE!
The interface cables can be attached to the panel using cable ties for strain relief.

NOTE!
If the cable shield is connected to the case of the multifunction panel, the exterior sheathing
of the interface cable must be removed at the location of the strain relief.

See also other documents in the category JUMO Equipment: