JUMO 705060 mTRON T - Multifunction Panel 840 Operating Manual - Manual (Page 104)

11 Device manager
104
Tab: Version
Display of various version numbers. The information may be useful when updating to a new
version of the device software.
Tab: PLC
Display of various cycle times. The information may be useful when programming personal
PLC programs.
Tab: Options
Display of optional hardware and software enhancements. Hardware and software enhance-
ments can be ordered when purchasing the system, or subsequently fitted or released. The
manufacturer will provide more information.
Tab: AI var. x
Display of the current analog variables. Analog variables are transferred using the serial inter-
faces (Com1, Com2) or LAN interface (e.g. via Modbus master function). The display is cycli-
cally updated.
Tab: Digit. var.
Display of the current digital variables. Digital variables are transferred using the serial interfac-
es (Com1, Com2) or LAN interface (e.g. via Modbus master function). The display is cyclically
updated.
Tab: Integer var. x
Display of the current integer variables. Integer variables are transferred using the serial inter-
faces (Com1, Com2) or LAN interface (e.g. via Modbus master function). The display is cycli-
cally updated.
Tab: Text var.
Display of the current text variables. Text variables are transferred using the serial interfaces
(Com1, Com2) or LAN interface (e.g. via Modbus master function). The display is cyclically up-
dated.
Tab: Eth. Info
Display of various data on the Ethernet interface and communication.
Data on the Ethernet interface is shown on the left side of the screen; here, the user can read
out the current IP address, etc.
Data relating to the Ethernet communication is shown on the right side of the screen.
NOTE!
Further information can be found in the online help in the PLC program environment.
Parameter Description
Ethernet status 1 Received Ethernet packets
Ethernet status 2 Received Ethernet packets with errors