9 alarm and event lists, Alarm and event lists – JUMO 705060 mTRON T - Multifunction Panel 840 Operating Manual User Manual

Page 87

9 Alarm and event lists

All alarms, events, and faults of the entire system are entered in the alarm and event lists.
Alarm lists only relate to the multifunction panel. Events and faults can come from the multi-
function panel and from the base unit (e.g. central processing unit).

NOTE!
The alarms of the multifunction panel are only entered in the alarm list for as long as the alarm
is present. If the alarm disappears again, the corresponding message will also be removed
from the alarm list.

NOTE!
In most cases, the user can configure whether a process (e.g. the exceeding of a specific
value at an analog input) constitutes an alarm or event.

NOTE!
Event lists contain all events that have occurred, including all alarms and faults.

NOTE!
Each of the lists can contain a maximum of 150 entries. The lists are deleted in the event of
reconfiguration.

NOTE!
The lists are not updated whilst the corresponding window is open.
Remedy: Touch the "Update" button.