JUMO 705060 mTRON T - Multifunction Panel 840 Operating Manual - Manual (Page 218)

14 Configuration – in setup program only
218
Input time
frame Field for entering a time frame in the format hh:mm:ss
The value (time frame in seconds) is allocated to an integer signal of the system
(selection from a selector).
Input time Field for entering the date and time in the format dd.mm.yy hh:mm:ss
The value (time frame in seconds as from 01.01.1984, 00:00:00) is allocated to an
integer signal of the system (selection from a selector).
Input digital Field for selecting a binary value (Low, High)
The value is allocated to a digital signal of the system (selection from a selector).
Change pro-
cess screen Button for changing to a different process screen
Push button Interface with button function
The status is allocated to the "Push button n" (version 01: n = 1 to 18; version 02:
n = 1 to 32) of the system (selection from a selector).
Additional functions in version 02: Object for user logon/logoff or for displaying the
"Login" menu.
Toggle button Button with changeover function
The status changes between position 1 and position 2. Each position can be allo-
cated a float value, an integer value, or a binary value. The destination is selected
from a selector and must correspond to the configured data type.
Status icon
(version 02)
Displays an icon.
The icon is selected from the figure list. The number of the figure is determined by
the value of an integer signal.
Batch info
(version 02)
Displays a batch text.
The text of the right column of a batch screen is displayed.
Program
choice
(version 02)
List for selection of a program
Depending on the intended use, the list either contains all programs or only those
programs which are assigned to a certain program generator. The number of the
program to be selected is written to an integer signal of the system (selection from a
selector).
Process step
choice
(version 02)
List for selection of a process step
The list contains all process steps which have been assigned to a certain program
generator. The number of the process step to be selected is written to an integer
signal of the system (selection from a selector).
Type Description