JUMO 705060 mTRON T - Multifunction Panel 840 Operating Manual - Manual (Page 25)

25
2 Description
2.6.2 Eco operation
The parameters for eco operation are set in the menu for standard operation. However, eco
operation can be used with all three operating modes.
In eco operation, the instantaneous values (current values) are recorded in a specified mini-
mum memory rate (independent of the tolerance band).
The value for the tolerance band (1) is stated with regard to the unit of the analog channels (e.g.
± 1 °C). If the measured values exit the tolerance band and if the new measured value outside
of the tolerance band is present at least for the duration of the memory rate configured in the
active operating mode, it will be recorded, saved, and provided with a new tolerance band.
t1 t1
(1)
(1) Tolerance band
t1 Saving via "Min. memory rate" (controlled save)
(1)