Allied Telesis AT-S80 - Manual (Page 94)

Chapter 9: Dial-in User Configuration
94 Section I: Using the Menus Interface
3. Type A to select Add User.
The following prompt is displayed:
Enter dial-in user name >
4. Type a name of a dial-in user. Then press Enter.
The following prompt is displayed:
Enter dial-in user password >
5. Enter the password of the dial-in user.
The following prompt is displayed:
Enter dial-in user dynamic VLAN ID >
6. Assign the dial-in user to a VLAN by entering a VID.
7. Type Q to select Quit to previous menu and save your changes.
Deleting a Dial-in
User
To delete a dial-in user, perform the following procedure.
1. From the Main Menu, type A to select Advanced Switch
Configuration.
The Advanced Switch Configuration Menu is shown in Figure 14 on
page 64.
2. From the Advanced Switch Configuration Menu, type D to select
Dial-in User Configuration.
The Dial-in User Configuration Menu is shown in Figure 20 on page
93.
3. Type type D to select Delete User.
The following prompt is displayed:
Enter dial-in user name >
4. Type the name of the dial-in user that you want to delete.
The dial-in user name is removed from the Dial-in User Configuration
Menu.
5. Type Q to select Quit to previous menu and save your changes.