Allied Telesis AT-S80 - Manual (Page 93)

AT-S80 Management Software User’s Guide
Section I: Using the Menus Interface 93
Configuring a Dial-in User
The procedures in this section describe how to create, delete, and modify
dial-in users. See the following procedures:
ˆ “Adding a Dial-in User” on page 93
ˆ “Deleting a Dial-in User” on page 94
ˆ “Modifying a Dial-in User” on page 95
Adding a Dial-in
User
To add a dial-in user, perform the following procedure:
1. From the Main Menu, type A to select Advanced Switch
Configuration.
The Advanced Switch Configuration Menu is shown in Figure 14 on
page 64.
2. From the Advanced Switch Configuration Menu, type D to select
Dial-in User Configuration.
The Dial-in User Configuration Menu is shown in Figure 20.
Figure 20. Dial-in User Configuration Menu
Advanced Switch Configuration -> Dial-in User Configuration Menu
User Name Password Dynamic VLAN
----------------- ----------------------- ------------------
Jenny ***** 2
Jill ******* 2
Ellen ***** 3
MaryAnn ****** 3
Tom ***** 3
Sam ***** 1
-------------------------------------------------------------
[N]ext Page
[D]elete User
[P]revious Page [M]odify User
[A]dd User [Q]uit to previous menu
Command>