Allied Telesis AT-S80 - Manual (Page 315)

AT-S80 Management Software User’s Guide
Section II: Using the Web Browser Interface 315
5. When you are finished configuring the parameters, click Apply at the
bottom of the 802.1x Access Control Configuration Page.
6. If the port control setting is Auto and you want to return the EAPOL
machine state on the port to the initialized state, select Yes for the
Initialize parameter and click Apply.
7. If the port control setting is Auto and you want the node connected to
the port to reauthenticate with the RADIUS server, select Yes for the
Re-auth Initialize parameter and click Apply.