Allied Telesis AT-S80 - Manual (Page 28)

Chapter 2: Getting Started with the Menus Interface
28 Section I: Using the Menus Interface
Using the Menus Interface
If you are using a DEC VT00 or ANSI (the default) terminal configuration,
refer to Table 1 for instructions on how to move through the menus and
select menu options.
When you press Enter to select a field in which you can enter a value, the
“>” symbol is displayed. For example:
Enter new password>
The “>” symbol indicates that you can enter a new value for the parameter
or change the existing value. After you have entered a value, press Enter.
Changes are immediately activated on the switch.
Table 1. Menus Interface Operations
When directed to You must
Enter your selection Type the menu option letter.
Enter information (for
example, entering a port
number) Type the information and press Enter.
Return to previous menu Type Q for Quit to Previous Menu.