Allied Telesis AT-S80 - Manual (Page 327)

AT-S80 Management Software User’s Guide
Section II: Using the Web Browser Interface 327
The Firmware Upgrade via HTTP Page is shown in Figure 94.
Figure 94. Firmware Upgrade via HTTP Page
4. Change the following parameters as necessary:
Image/Version Date
Displays the current version and date of software installed on the
switch. This field cannot be changed.
Firmware File:
Enter the path of the firmware file or click the Browse button and
select the filename.
5. Click Apply.
The software immediately begins to download onto the switch. This
process takes a few minutes. After the software download is complete,
the switch initializes the software and reboots. You will lose your web
browser connection to the switch during the reboot process.