Allied Telesis AT-S80 - Manual (Page 307)

AT-S80 Management Software User’s Guide
Section II: Web Browser Interface 307
6. In the Path Cost column for the port you want to configure, type a
number for the Path Cost.
Path cost is described in “Path Costs and Port Costs” on page 151.
7. Click Apply.
8. To configure all of the ports to the same settings, in the All row,
configure one, two, or all of the following settings: STP Status, Priority,
and Path Cost. Then click Apply.
Configuring the
Advanced RSTP
Port Settings
To configure the advanced RSTP port settings, perform the following
procedure:
1. From the bookmarks on the left side of the page, select Bridge.
The Bridge folder expands.
2. From the Spanning Tree folder, select Spanning Tree.
The Spanning Tree folder expands.
3. From the Spanning Tree folder, select RSTP Advanced Port.