Allied Telesis AT-S80 - Manual (Page 214)

Chapter 20: Starting a Web Browser Management Session
214 Section II: Using the Web Browser Interface
Establishing a Remote Connection to Use the Web Browser Interface
To manage an AT-FS750/16 or AT-FS7950/24 switch using the web
browser interface, you must assign an IP address and a subnet mask to
the switch. To manually assign an IP address, refer to “Configuring the IP
Address, Subnet Mask, and Gateway Address” on page 32. To configure
the switch to obtain its IP configuration from a DHCP server, refer to
“Enabling and Disabling the DHCP Client” on page 35. The initial
assignment of an IP address must be made through a local management
session.
Note
The remote management station must be a member of the switch’s
Default VLAN. The switch responds and processes management
packets only if they are received on an untagged port of the Default
VLAN.
To start a web browser management session, perform the following
procedure:
1. Start your web browser.
2. In the URL field of the browser, enter the IP address of the switch to be
managed.
Figure 52. Entering a Switch’s IP Address in the URL Field
Switch’s IP Address