Allied Telesis AT-S80 - Manual (Page 288)

Chapter 30: Simple Network Management Protocol (SNMP)
288 Section II: Using the Web Browser Interface
Deleting an SNMP Community
Use the following procedure to delete an SNMP community in the
Community Table.
1. From the bookmarks on the left side of the page, select SNMP.
The SNMP folder expands.
2. From the SNMP folder, select Community Table.
The Community Table Page is shown in Figure 81 on page 286.
3. To delete a community, select delete in the Community Table next to
the community that you want to remove.
The Community Table Page is updated.