Allied Telesis AT-S80 - Manual (Page 253)

AT-S80 Management Software User’s Guide
Section II: Using the Web Browser Interface 253
Disabling Port Mirroring
To disable port mirroring, perform the following procedure:
1. From the Bridge folder, select Spanning Tree.
The Spanning Tree folder expands.
2. From the Spanning Tree folder, select Mirroring.
The Mirroring Page is shown in Figure 67 on page 252.
3. From the Status field, select Disable from the pull-down menu. Then
click Apply.
Port mirroring is disabled on the switch immediately. You can now use
the mirroring port for regular network operations.