Allied Telesis AT-S80 - Manual (Page 309)

AT-S80 Management Software User’s Guide
Section II: Web Browser Interface 309
Viewing the RSTP Topology
To view the current RSTP topology, perform the following procedure:
1. From the bookmarks on the left side of the page, select Bridge.
The Bridge folder expands.
2. From the Bridge folder, select Spanning Tree.
The Spanning Tree folder expands.
3. From the Spanning Tree folder, select Topology Info.
The Designated Topology Information Page is shown in Figure 89.
Figure 89. Designated Topology Information Page
This page displays the following information about the ports:
Port Trunk
Indicates the trunk of which the port is a member.