Allied Telesis AT-S80 - Manual (Page 339)

339
Appendix A
AT-S80 Software Default Settings
Table 8 lists the factory default settings for the management software.
Table 8. AT-S80 Management Software Default Settings
Parameter Default Setting
IP Configuration
IP Address 0.0.0.0
Subnet Mask 0.0.0.0
Default Gateway Address 0.0.0.0
DHCP Client Disabled
System Administration
System Name (blank)
System Location (blank)
System Contact (blank)
Manager Interface
Manager Username manager
Manager Password friend
Console Idle Timeout 5 minutes
Web Server Enabled
Ping Configuration
Target IP Address 0.0.0.0
Number of Requests 10
Timeout 3 seconds
Port Configuration
Port Status Enabled
Speed Auto-Negotiation
Duplex Mode Auto-Negotiation