Allied Telesis AT-S80 - Manual (Page 234)

Chapter 21: Basic Switch Parameters
234 Section II: Using the Web Browser Interface
Boot Loader
The version number and build date of the bootloader firmware.
Hardware Information Section:
Revision
The hardware version number.
DRAM Size
The size of the DRAM, in megabytes.
Flash Size
The size of the flash memory, in megabytes.
Console Baud Rate
The baud rate of the console port.
Administration Information Section:
Switch Name
The name assigned to the switch. To give the switch a name, refer to
“Configuring System Management Information” on page 226.
Switch Location
The location of the switch. To specify the location, refer to “Configuring
System Management Information” on page 226.
Switch Contact
The contact person responsible for managing the switch. To specify
the name of a contact, refer to “Configuring System Management
Information” on page 226.
System MAC Address, IP Address, Subnet Mask, and Gateway
Section:
MAC Address
The MAC address of the switch. You cannot change this value.
IP Address
The IP address of the switch. Refer to “Configuring an IP Address,
Subnet Mask and Gateway Address” on page 220 to manually assign
an IP address or “Enabling and Disabling the DHCP Client” on
page 225 to activate the DHCP client.
Subnet Mask
The subnet mask for the switch. Refer to “Configuring an IP Address,
Subnet Mask and Gateway Address” on page 220 to manually assign
a subnet mask or “Enabling and Disabling the DHCP Client” on
page 225 to activate the DHCP client.
Default Gateway
Default gateway’s IP address. Refer to “Configuring an IP Address,
Subnet Mask and Gateway Address” on page 220 to manually assign