Allied Telesis AT-S80 - Manual (Page 229)

AT-S80 Management Software User’s Guide
Section II: Using the Web Browser Interface 229
This value appears as the Index value in the Administration table.
5. To create a user name, enter a user name in the box next to the User
Name field.
You can enter a value of up to 12 alphanumeric characters.
6. To add a password to the above user name, enter a password of up to
12 alphanumeric characters in the box next to the Password field.
7. To confirm the above password, retype the password in the box next to
the Confirm Password field.
8. Click Add to activate your changes on the switch.
Modifying
Administration
Information
To modify the password of a user name, perform the following procedure.
1. From the book marks on the left side of the page, select System.
The System folder expands.
2. From the System folder, select Administration.
The Administration Page is shown in Figure 58 on page 228.
3. Select the user name that you want to change and click modify. The
Modify Administration Page is displayed. See Figure 59.
Figure 59. Modify Administration Page
4. Click Apply to activate your changes on the switch.