Allied Telesis AT-S80 - Manual (Page 340)

Appendix A: AT-S80 Software Default Settings
340
Flow Control (Full-duplex Mode) Enabled
Back pressure (Half-duplex Mode) Enabled (not adjustable)
Port Trunking
Status Disabled
IGMP Snooping
Status Disabled
IGMP Snooping Age-Out Timer 280 seconds
Port Mirroring
Status Disabled
VLAN
Name Default VLAN
VID 1
Ports All Ports (Untagged)
SNMP
public community
Enabled, Read Only
private community Enabled, Read Write
Quality of Service
Status Disabled
Mappings of IEEE 802.1p Priority
Levels to Egress Port Priority Queues See Table 2 on page 141.
Priority Override Status Disabled
Priority Queue Queue 0
RSTP
Status Disabled
Bandwidth Control
DLF Ingress Packet Status
Disabled
Broadcast/Multicast Packet Threshold Low
Packet Threshold Mode Broadcast/Multicast
Table 8. AT-S80 Management Software Default Settings (Continued)
Parameter Default Setting