Allied Telesis AT-S80 - Manual (Page 226)

Chapter 21: Basic Switch Parameters
226 Section II: Using the Web Browser Interface
Configuring System Management Information
This section explains how to assign a name to the switch, as well as the
location of the switch and the name of the switch’s administrator. Entering
this information is optional.
To set a switch’s administration information, perform the following
procedure:
1. From the book marks on the left side of the page, select System.
The System folder expands.
2. From the System folder, select Management.
The Management Page is shown in Figure 56.
Figure 57. Management Page
3. Configure the following parameters as necessary:
System Description
Specifies the model number of the switch. You cannot change this
parameter.
System Name
Specifies a name for the switch, for example, Sales. The name is
optional and may contain up to 50 characters.