beautypg.com

Rebooting the switch, Figure 9. switch tools configuration menu – Allied Telesis AT-S80 User Manual

Page 46

background image

Chapter 3: Basic Switch Parameters

46

Section I: Using the Menus Interface

Rebooting the Switch

This procedure reboots the switch and reloads the AT-S80 management
software from flash memory. You can reboot the device if you believe it is
experiencing a problem. Rebooting the switch does not change any of the
its parameter settings.

Caution

The switch does not forward network traffic during the reboot
process. Some network traffic may be lost.

To reboot the switch, perform the following procedure:

1. From the Main Menu type T to select Switch Tools.

The Switch Tools Configuration Menu is shown in Figure 9.

Figure 9. Switch Tools Configuration Menu

2. From the Switch Tools Configuration Menu, type R to select System

Reboot.

Main Menu -> Switch Tools Configuration Menu

Software [U]pgrade...
System [R]eboot
[P]ing Execution
[Q]uit to previous menu

Command>