Allied Telesis AT-S80 - Manual (Page 277)

AT-S80 Management Software User’s Guide
Section II: Using the Web Browser Interface 277
Modifying a Tagged VLAN
To modify a tagged VLAN, perform the following procedure:
1. From the bookmarks on the left side of the page, select Bridge.
The Bridge folder expands.
2. From the Bridge folder, select VLAN.
The VLAN folder expands.
3. From the VLAN folder, select Tagged VLAN.
An Example of a Tagged VLAN page is shown in Figure 77 on page
276.
4. In the VLAN Action column, click modify next to the VLAN that you
want to change.
The Modify VLAN Page is displayed, see Figure 78
Figure 78. Modify VLAN Page
5. To change the VLAN ID, type in a VLAN ID in the VLAN ID field.
You can choose a value between 2 and 4,000.